Your Cart

CYMA Remington M700 / VSR Bolt Action Spring Rifle - Black

The Tokyo Marui VSR-10 was the base platform of choice for sniper builds for decades thanks to its wide aftermarket and superb performance straight out of the box. Nowadays, snipers prefer to base their build on cheaper alternatives like the CM.701, saving a few dollars on the base gun so it can be reinvested in upgrade parts.

This rifle is a near-perfect copy of the Tokyo Marui VSR-10 Pro but comes with a 6.03mm tightbore inner barrel and a far stronger spring, hitting hard at approximately 410-430FPS on a 0.2g BB straight out of the box. The barrel and receiver are constructed from alloy and the stock from superb quality high density polymer with a textured finish, giving the old TM a run for its money when it comes to build quality!

Starting at the tip of the 22-inch outer barrel, we have the front iron sight which is a flat blade-style sight which can be removed via the screw in its base. This rifle does not come with a scope rail, so we recommend leaving the front sight in place until you are ready to move up to a scope.

The stock/chassis of the CM.701 which is constructed from high density polymer with a high-quality crackle-textured finish. This is a big step up from other VSR clone rifles which often have a smooth, shiny finish which screams "toy gun". The magazine release is at the front of the chassis, with the magazine well located just behind. In front of the magazine release, we are treated to a steel Harris-style bipod/sling stud, which can be used to mount either a Harris-style bipod or a sling loop.

The receiver which is constructed from alloy, with the rear iron sight mounted up top. The rear sight can be adjusted for both windage and elevation using an Allen key and is the open style of rear sight which allows for a great field of view so you can track moving targets more easily than with aperture sights. The safety catch is located on the right side, well within reach of the thumb when the rifle is held in a firing grip. The forward position is fire, marked with an engraved "F" and the rearmost is safe, marked with an "S".

The bolt handle is located at the rear of the receiver, on the right side. To cock the rifle, you will need to rotate the bolt upwards, draw it back as far as it will go, push it forward again and rotate it back into place to lock, just like a real bolt action rifle. The bolt handle is textured for added grip and is a reasonable pull for a 1.6-1.7J rifle, though at its current spring power, it may be difficult to cock for younger players or weaker arms.

Whether it is for plinking in the garden or harassing the enemy team at long range in a skirmish, the CM.701 presents fantastic value for any budding Airsoft sniper. Whether you're using it as it is or upgrading it to the maximum, this affordable beast should serve you well!


  • Full metal Barrel, Receiver and Internal construction
  • 6.03mm Tightbore inner barrel
  • Spring bolt action sniper rifle - Requires cocking before each shot
  • Tokyo Marui VSR-10 Pro clone - Compatible with TM VSR-10 aftermarket upgrades
  • Open iron sights - Rear sight adjustable for windage and elevation
  • Tapered outer barrel to replicate the Remington 700 rifles
  • Textured high density polymer stock/chassis - Rock solid, high quality textured feel
  • Harris bipod/sling lugs (mounting points) front and rear
  • Rubber butt plate - Grips the shoulder well in any weather conditions
  • Manual safety catch on the right side - Forward for fire, rearward for safe
  • Ambidextrous magazine release - Button on the centre of the chassis, just ahead of the magwell
  • Comes with one magazine but is Compatible with TM based VSR/BAR-10 magazines!


  • Inner Barrel Diameter: 6.03mm
  • Muzzle Velocity: Approx. 410-430 FPS with 0.20g BBs
Dear customer
Dear Customer, Your account from the old website cannot be used on this new website. Please proceed to re-register. Thank you for your cooperation.